Design Rules for circuits to be conformal coated by Selective Robot

Selectively coating a circuit board with a robot can be a simple process.

However, for too many designers, conformal coating is simply a part number, to be applied to circuit boards.

This failure to appreciate the subtleties of the selective robot application process can result in an un-coatable (at least as specified) assembly process.

Follow our conformal coating design rules and save time, money and pain!

Every company has its own horror stories and folk lore about the challenges faced when conformal coating an assembly to successfully meet the designer’s specification.

It is almost certain that the majority of these ‘nightmare’ scenarios could have been headed off during the design and or prototyping stages of development.

Coating close to connectors.jpeg
Trying to coat connectors right up to the base of the component is going to challenge even the best engineers. Apply some conformal coating Design Rules and avoid these problems!

The design rules for conformal coating are straightforward.

Follow them and you can save money and time in your application process.

However, if the rules are not followed, the resultant circuit board design can challenge even the most sophisticated conformal coating system and its operator to achieve the finish desired.

Find out more about Conformal Coating Design Rules for Selective Robot Systems.

Author: nexus3c

A global resource for the Conformal Coating industry providing information, solutions, connections and advice on all areas of Conformal Coating including Conformal Coating Service, Equipment, Materials, Training, Documentation and Consultancy.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: