Things you should know about Parylene

What is Parylene?

Parylene is a conformal coating that is deposited as a gas in a vacuum chamber.

It is a completely different process to the liquid conformal coatings and its properties offer advantages and disadvantages in comparison.

Parylene is a dry process compared to the standard “wet” liquid conformal coatings.

Since Parylene is deposited as a gas its thickness is almost uniform across the whole circuit board.

 

The ABCs of Parylene

Parylene is an organic polymer conformal coating that is deposited as a gas in a vacuum chamber.

Therefore, the Parylene application process is a completely different process to the liquid conformal coatings.

This gives Parylene unique properties that are not possible with the typical liquid conformal coatings normally used in electronics protection.

 

Five key facts about Parylene

  1. Parylene is the trade name for a variety of poly(p-xylylene) polymers
  2. It is a conformal coating that is deposited as a gas in a vacuum chamber. This is different to liquid conformal coatings.
  3. The Parylene film is created via a controlled Chemical Vapor Deposition (CVD) process.
  4. It is a dry process compared to the standard “wet” liquid conformal coatings.
  5. This process makes Parylene a highly effective moisture and dielectric barrier that outperforms most liquid conformal coatings.

 

Three important points you should know about Parylene

  1. Parylene has unique properties that are not possible with the liquid conformal coatings.
  2. Parylene is a conformal coating that is deposited as a gas in a vacuum chamber.
  3. This is different to liquid conformal coatings that can be brushed, dipped or sprayed.