How thick should I apply my conformal coating?

 

positector

The measurement of the conformal coating thickness on a printed circuit board (PCB) to ensure internal and international standards are met is now a standard process in production.

There are several methods for measurement of conformal coating thickness including dry and wet film processing. However, the most important factor is how thick should the coating be?

First, you can reference both internal and international standards like IPC A 610 for conformal coating application.  They can help a lot.

These standards will help guide you in the coating thickness required for a particular coating materials since the coating thickness suggested will be dependent on the resin of the conformal coating.

For example, an acrylic or polyurethane based conformal coating has a different coating thickness requirement to silicone-based materials.

Below are the suggested conformal coating thicknesses from the IPC A 610 standard:

  • Acrylic            30-130 μm
  • Urethane        30-130 μm
  • Epoxy             30-130 μm
  • Silicone          50-210 μm
  • Parylene        10-50 μm

Note, that this is the average thickness across the circuit board. It is almost impossible to achieve a homogeneous coating thickness with the liquid conformal coatings due to surface tension issues during drying.

Using this information you can now move forward and look at the application of the conformal coating.


Need to find out more?       

For further information on process control and conformal coating thickness then contact us directly.

If you are new to Nexus and our work on conformal coatings then a good place to go is our Start Here page or our free conformal coating ebook.

Advertisements

Author: nexus3c

A global resource for the Conformal Coating industry providing information, solutions, connections and advice on all areas of Conformal Coating including Conformal Coating Service, Equipment, Materials, Training, Documentation and Consultancy.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s