China Nexus Workshop Topic: RFI / EMI Shielding- A basic understanding

Nexus are to hold a FREE conformal coating workshop in the Diamond SCH coating facility in Shenzhen China on the 17th October 2012.

Topics include RFI Shielding Coating – A basic understanding which is a presentation looking at issues such as what RFI Shielding coatings are, why they are used, where they are applied and selection of the appropriate coating for your application.

Want to protect your circuit board from RFI / EMI interference and don’t know how to do it? Don’t miss this presentation.

This One-day workshop will be held at the Diamond SCH Conformal Coating Facility. The address is 3rd Floor, A5 Building, Tianrui Industrial Park, Fuyuan Road1, FuYong Town, Baoan District, Shenzhen, China.

Click  Shenzhen China Conformal Coating Workshop October 2012 for further information or book your place.

China Nexus Workshop Topic: Conformal Coating – Select the right application system with the right material or not!

Nexus are to hold a FREE conformal coating workshop in the Diamond SCH coating facility in Shenzhen China on the 17th October 2012.

Topics include selection of the right application system with the right conformal coating material or what happens if you get it wrong!

This presentation will examine all of the generic conformal coating materials used in the electronics industry and answer where and when they should be used with the various conformal coating equipment or processes available.

Want to choose the right conformal coating equipment for your conformal coating material? Don’t miss this presentation.

This One-day workshop will be held at the Diamond SCH Conformal Coating Facility. The address is 3rd Floor, A5 Building, Tianrui Industrial Park, Fuyuan Road1, FuYong Town, Baoan District, Shenzhen, China.

Click  Shenzhen China Conformal Coating Workshop October 2012 for further information or book your place.

Ask The Expert: Dr Lee Hitchens, Nexus on Key Conformal Coating Material Challenges

“Out of all the Key Material Challenges I see on a regular basis, one of the most prolific is difficulties in adhesion to solder resist or to no clean residues and contaminants.“
 “It can be as basic as the coating just will not stick to the PCB or it runs away from areas on the PCB. At other times, it’s interpreting just how well the coating is stuck and determining if it’s good enough for the customer? Normally, this cannot be answered instantly and leads to some serious thinking!”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Karl Hardcastle, SCH Services Ltd, Subcontract Conformal Coating Service on Key Conformal Coating Material Challenges

“One of the biggest issues we face is availability of the materials. As a subcontract coating house we generally have to use the coating selected by the customer. This can have dramatic issues occasionally when lead times on products can stretch into weeks or months and the customer wants the product now!”
“Conformal coating is one of the last processes on the PCB. Coating houses are normally making up the time lost in other areas. If you can plan the production to coincide with the material supply chain it’s a great help!”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Gordon Watson, SMS Automation, Conformal Coating Equipment on Key Conformal Coating Material Challenges

“Our greatest Challenge is establishing good communication at an early stage with the key decision makers to determine the critical factors such as material specification, performance and requirements. Customers should also think of future needs when discussing conformal coating application systems rather than limit their choices to what is available on a standard machine.”

“Our skill is in combining machine building and automation skills with knowledge of the process of conformal coating and so it is important that we obtain a thorough understanding of our customers’ requirements and quickly formalise them into a  plan as quickly as possible.”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Frank Hart, Sales and Marketing Director, PVA Conformal Coating Robotic Systems on Key Conformal Coating Material Challenges

“There has been much segmentation in the coating industry and this has driven chemical companies to the most prominent current trend in the marketplace, customization.  No longer is one coating chemistry versatile enough for the changing demands of the consumer.  It is no longer unusual to take a long standing coating material and have 8-10 versions of the formulation on the market.  Viscosity modifications, sometimes from 20 cps all the way to a non-slumping gel version, tend to be the most popular.  If you are looking to modify the flow characteristics, limit wicking into keep out areas, produce a dam, or control the solvent to resin ratio, there is typically a product tailored to your requirements.”

“Maybe the appearance of the coating is of greater importance to the end user.  This can be as radical as the physical color of the coating itself or maybe just the level of fluorescence under black light.  Some end users do specify the coating needs to be visible to the operator from a predetermined distance from the application, or perhaps they are using an automated AOI system.  Maybe your technology is proprietary to the point that an opaque coating protects your design in lieu of clear transparent materials.  Such requirements may drive an end user to request a custom formulation with these properties.”

“No matter what the request may be, from appearance to viscosity, to the cure mechanism or even changing the solvent carrier to a VOC friendly alternative, customizing formulations has become the norm more than the exception and chemical manufacturers are marketing these products as standard solutions.  End users should always work with formulators to assure that any modification to the original chemistry does not affect performance properties such as adhesion, protection, or curing. From an application standpoint, having your chemistry slightly altered may affect a variety of process parameters so always consult your material manufacturer and equipment manufacturer’s applications experts prior to making any formulation change.  In an automated process the changes may be as simple as modifying the robot speed or adjusting the path spacing to compensate for the new flow characteristics, or it may require a complete redesign of the fluid system and spray/dispensing valves….  But these factors can always be pre-qualified in a test laboratory.”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Dave Prouse, Diamond SCH, Conformal Coating Equipment on Key Conformal Coating Material Challenges

“One of the biggest challenges is talking to a customer and finding that a conformal coating material and a conformal coating system has already been specified and the two are not easily compatible.”
“Linking the two in the design stages is critical in stopping the cost of the project multiplying by 2-3 times and causing untold misery and difficulties downstream.”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Mark Rager, Diamond MT, Subcontract Conformal Coating Service house on Key Conformal Coating Material Challenges

“It’s well known in the electronics industry that cleanliness of a Printed Wiring Board (PWB) is crucial to the assembly’s performance and reliability. What many don’t realise is that the cleanliness of the board is also paramount in adhesion of the conformal coating that may be applied to the board later in the process.”

“Almost all coating material suppliers recommend that you clean and dry the boards prior to coating. However, too often cost is a factor when determining if cleaning is needed. What many do not take into consideration is the affects this has on coating.”
“From a conformal coating house’s perspective this is a very real concern due in part to the compatibility issues that often come about when the coating to which the customer has selected does not adhere to the mold release agents, fluxes, oils, rosins (to name a few) that have been left behind in the manufacturing process. This makes the coating house look bad.”

“Further, its known that contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength, which is counterproductive to what some of the characteristics/reasons that conformal coating is used for. You would not want to paint your car without preparing the surface? So then why would one want to do this to such critical/sensitive electronics which are being manufactured?”

“In general, the minimal added cost added for cleaning far outweighs the time and money (when added up) associated with the rework/touchup caused by dewetting issues, missed deliveries and aesthetically unpleasing conformal coating caused by touchup to areas that have dewetting caused in part to contamination on the board. Cleanliness of completed circuit boards is, therefore, of vital interest.”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating material challenges.

Ask The Expert: Gordon Watson, Advanced Coating robotics, Conformal Coating Dip Systems on Key Conformal Coating Inspection Challenges

“When considering the finish of the circuit board and what the quality of the coating is like we find customers perceptions and ours can vary. This is generally down to preconceived ideas of what a good quality coating should look like.”

“The standards state that when dipped a PCB can have coating dripping at a corner and have bubbles within. However, many customers don’t like this. The problem is that to reduce the dripping effect tends to have a knock on affect on the rest of the quality of the PCB like conformal coating thickness. So, educating the customer on what they should be inspecting and what is acceptable is key for the conformal coating inspection process

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating inspection.

Ask The Expert: Chris Palin Humiseal, Conformal Coating Materials on Key Conformal Coating Inspection Challenges

“The UV brightener used in conformal coatings can vary from different coating manufacturers. The variation is due to volume or type of brightener used. Generally speaking a high brightness UV tracer will  aid the automatic inspection system to identify that correct coating areas are covered and also look for stray material that may have entered critical keep out areas.”

“Some conformal coatings do not contain UV tracer and this is usually for a reason such as coating over LEDs or optical sensors where the UV tracer could affect light transmission. UV brighteners degrade over time with exposure to UV light therefore the coating on older PCBs may not show up quite as well depending on time and physical location of the board during its operational lifetime.”

Visit the Nexus Associate Experts Section and read what other experts have to say about conformal coating inspection.