Winter Program of Conformal Coating Webinars Through Nexus

Nexus are to hold a series of webinars on conformal coating topics in the Autumn of 2012.The series of four online conformal coating webinars will cover the following topics and each last 90 min:
Conformal Coating Guide to Design, Application and Reliability 12th November 2012
Application Methods, Materials for Field Reliability 10th December 2012
Inspection and Quality Control of Coated Boards 7th January 2013
Rework, Repair and in Process Applications 4th February 2013

Conformal Coating Guide to Design, Application & Reliability
12th November 2012

Conformal coating may be a new process to many people and its important to have a good grounding in the fundamentals before embarking on the use of coatings. An incorrect choice at the design stage can add significant cost to the product without the desired benefits. Correct selection of components and conformal coating application techniques can significantly reduce cost by reducing or eliminating masking steps. A key step during design is to assess the effective reliability prior to going into full production.
Application Methods, Materials for Field Reliability
Monday 10th December

There are different application methods and conformal coating materials to coat a board assembly. The product type and its application are the key factors in the decision process but do you have the onsite knowledge? You should also look at the onsite or subcontract services options, depending on the product and the requirements, and it may make sense to contract it out for technical reasons. Assessment of the effectiveness of the selected conformal coating is key to long term reliability but how is this assessed and what are the criteria?
Inspection & Quality of Coated Board Assemblies
Monday 7th January

Conformal Coating Inspection standardsexist from a variety of sources and are based mostly on practical experience. There are many cosmetic defects that are reworked in industry which are unlikely to actually impact on product quality. The majority of coated products are inspected manually but with the growing use of coating application in high volume, automatic optical inspection is gaining in popularity.
Rework, Repair & In Process Application
Monday 4th February

Rework of conformal coated boards is a skilled job to obtain the optimum product reliability. Different materials or thicker coating may require different techniques to maintain the same reliability provided by the original coating system. It’s not always possible to use the same coating system in a rework situation so what are the alternatives?Each webinar is £75 plus VAT or you can book the four sessions for £250 plus VAT. If you or your team are unavailable for one of the dates we can make a video recording of the session available for a limited time after the session date so you never miss a session.

If the webinars are of interest then contact us directly to book by clicking here at Conformal coating Webinars or go to our contact page.